Variable breakdown
ast_note
Section and category
Biochemistry Data.Blood biomarkers (lab)
Description
“Further details of any measurement problems”
Additional information
| Metadata | |
|---|---|
| contents | Text |
| is_mandatory | No |
Data summary
Baseline
| value | freq | pct_valid | pct_tot |
|---|---|---|---|
| {RES EDIT OLD=13.7}{DILUTION=100 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| {RES EDIT OLD=5.9}{DILUTION=200 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| {RES EDIT OLD=8.3}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 0}; AU680 result: {LIH test not performed}; ApoA result invalidated; incorrect analyser set points | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 0}; AU680 result: {LIH test not performed}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 0} | 32 | 5.29 | 0.01 |
| AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 0}; AU680 result: {LIH test not performed}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 0}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 0} | 3 | 0.50 | 0.00 |
| AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 0}; AU680 result: {Result is lower than the dynamic range, Result is lower than the low panic value}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 0}; “AST less than 3 U/L - below analytical range of analyser” | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 1}; AU680 result: {LIH test not performed} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 1}; AU680 result: {LIH test not performed}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 1} | 3 | 0.50 | 0.00 |
| AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 1}; AU680 result: {LIH test not performed}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 1}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 2} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 2}; AU680 result: {LIH test not performed}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 1} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 2}; AU680 result: {LIH test not performed}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 2} | 3 | 0.50 | 0.00 |
| AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 5}; AU680 result: {Result may be affected by lipemia}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 5} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 0}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 0.00 (Insufficient sample, Unable to calculate a result), ICTER = 0.00 (Insufficient sample, Unable to calculate a result), LIPEM = 0.00 (Insufficient sample, Unable to calculate a result)} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 0}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 0} | 15 | 2.48 | 0.00 |
| AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 0}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 0}; AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 0} | 2 | 0.33 | 0.00 |
| AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 0}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 0}; AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 1} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 1}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 1} | 3 | 0.50 | 0.00 |
| AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 2}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 2} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 2}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 3} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 4}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 4} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 4}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 4} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 5}; AU680 result: {LIH test not performed}; AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 4}; {RES EDIT OLD=10.1}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 2, ICTER = 0, LIPEM = 0}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 2, ICTER = 0, LIPEM = 0} | 5 | 0.83 | 0.00 |
| AU680 analysis: {HEMOL = 2, ICTER = 0, LIPEM = 1}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 2, ICTER = 0, LIPEM = 1} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 3, ICTER = 0, LIPEM = 0}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 4, ICTER = 0, LIPEM = 0} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {LIH test not performed}; “AST result obtained from 1 in 5 manual dilution”; {RES EDIT OLD=46.7}{DILUTION=200 dilutant into 50 sample}; “Unable to obtain ALT result, sample too lipaemic” | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {LIH test not performed}; {RES EDIT OLD=10.4}{DILUTION=200 dilutant into 100 sample}; “Unable to obtain a valid ALT result, see SEF-10”; “Result obtained from 1 in 3 dilution” | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {LIH test not performed}; {RES EDIT OLD=10.6}{DILUTION=100 dilutant into 50 sample}; “AST Result obtained from 1 in 3 manual dilution”; “Unable to obtain ALT result due to interferance” | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {LIH test not performed}; {RES EDIT OLD=4.1}{DILUTION=1000 dilutant into 100 sample}; “AST Result obtained from 1 in 11 manual dilution”; “Unable to obtain result for ALT due to interference.” | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {LIH test not performed}; {RES EDIT OLD=8.2}{DILUTION=200 dilutant into 100 sample}; ApoA result invalidated; incorrect analyser set points | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {LIH test not performed}; {RES EDIT OLD=8.8}{DILUTION=150 dilutant into 50 sample}; AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {LIH test not performed}; {RES EDIT OLD=91.7}{DILUTION=100 dilutant into 50 sample}; “Result obtained from 1 in 3 automatic dilution”; “Please ignore comment regarding automatic dilution. Result”,“obtained using a 1 in 3 manual dilution.”; “No Lp(a) result obtained due to interference.” | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {LIH test not performed}; AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; {RES EDIT OLD=12.6}{DILUTION=100 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {LIH test not performed}; AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; {RES EDIT OLD=4.4}{DILUTION=200 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {LIH test not performed}; Nephelometer analysis: { “Sample was turbid” }; {RES EDIT OLD=15.4}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {OD of reaction is higher than maximum OD range, Unable to calculate a result}; AU680 result: {OD of reaction is higher than maximum OD range, Unable to calculate a result}; AU680 result: {LIH test not performed}; “SEF 22” | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {OD of reaction is higher than maximum OD range, Unable to calculate a result}; AU680 result: {OD of reaction is higher than maximum OD range, Unable to calculate a result}; AU680 result: {Not enough data to determine linearity of reaction, Unable to calculate a result}; Nephelometer analysis: { “Sample was turbid” }; AU680 result: {Not enough data to determine linearity of reaction, Unable to calculate a result}; AU680 result: {Not enough data to determine linearity of reaction, Unable to calculate a result}; AU680 result: {Not enough data to determine linearity of reaction, Unable to calculate a result}; AU680 result: {LIH test not performed, Linearity error in rate method} | 1 | 0.17 | 0.00 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; Nephelometer analysis: { “Sample was turbid” }; AU680 result: {LIH test not performed}; “Result obtained from 1 in 2 automatic dilution”; {RES EDIT OLD=10.4}{DILUTION=100 dilutant into 100 sample}; “Result obtained from manual 1 in 2 dilution - not 1 in 2”,“automatic dilution” | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed, Linearity error in rate method, Result is lower than the dynamic range, Result is lower than the low panic value}; AU680 result: {LIH test not performed, Linearity error in rate method, Result is lower than the dynamic range, Result is lower than the low panic value} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed} | 291 | 48.10 | 0.06 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=10.3}{DILUTION=200 dilutant into 100 sample}; “AST Result obtained from 1 in 3 manual dilution” | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=10.4}{DILUTION=100 dilutant into 50 sample}; “Result obtained from 1 in 3 manual dilution.” | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=10.4}{DILUTION=450 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=10.6}{DILUTION=400 dilutant into 100 sample}; {RES EDIT OLD=10.6}{DILUTION=400 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=10.7}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=10.7}{DILUTION=200 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=10.8}{DILUTION=200 dilutant into 50 sample}; “AST Result obtained from 1 in 5 manual dilution” | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=107.5}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=11.1}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=11.2}{DILUTION=100 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=11.3}{DILUTION=100 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=11.7}{DILUTION=200 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=11.8}{DILUTION=100 dilutant into 50 sample}; “AU680 result may be effected by lipaemia” | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=11.9}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=11}{DILUTION=200 dilutant into 100 sample}; “Result obtained from 1 in 3 automatic dilution”; “Result obtained from 1 in 3 manual dilution, please ignore”,“previous comment.” | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=12.5}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=12.5}{DILUTION=200 dilutant into 50 sample}; “AST Result obtained from 1 in 5 manual dilution” | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=12.5}{DILUTION=50 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=12.8}{DILUTION=50 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=12}{DILUTION=100 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=122.9}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=13.8}{DILUTION=200 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=14.3}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=14}{DILUTION=200 dilutant into 100 sample}; “AST Result obtained from 1 in 3 manual dilution” | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=15.9}{DILUTION=100 dilutant into 100 sample}; {RES EDIT OLD=15.9}{DILUTION=100 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=155.5}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=16.5}{DILUTION=100 dilutant into 100 sample}; {RES EDIT OLD=16.5}{DILUTION=100 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=16.6}{DILUTION=100 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=16.6}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=17.1}{DILUTION=100 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=17.1}{DILUTION=200 dilutant into 100 sample}; “AST Result obtained from 1 in 3 manual dilution” | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=19.5}{DILUTION=50 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=20.8}{DILUTION=200 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=21.3}{DILUTION=200 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=23.1}{DILUTION=100 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=23.3}{DILUTION=200 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=29}{DILUTION=400 dilutant into 100 sample}; {RES EDIT OLD=29}{DILUTION=400 dilutant into 100 sample}; {RES EDIT OLD=29}{DILUTION=400 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=3}{DILUTION=200 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=5.2}{DILUTION=400 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=5.5}{DILUTION=400 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=5.8}{DILUTION=450 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=7.6}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=7.8}{DILUTION=200 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=8.2}{DILUTION=200 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=8.4}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=8.5}{DILUTION=100 dilutant into 50 sample}; “AST Result obtained from 1 in 3 manual dilution” | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=8.5}{DILUTION=50 dilutant into 100 sample}; {RES EDIT OLD=12.75}; {RES EDIT OLD=8.5}{DILUTION=100 dilutant into 50 sample}; “Please ignore 50 diluant into 100 sample. Incorrect.” | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=8.6}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=9.1}{DILUTION=200 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=9.5}{DILUTION=100 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=9.6}{DILUTION=200 dilutant into 100 sample}; {RES EDIT OLD=9.6}{DILUTION=200 dilutant into 100 sample}; “AST Result obtained from 1 in 3 manual dilution” | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=9.6}{DILUTION=200 dilutant into 50 sample}; “AST Result obtained from 1 in 5 manual dilution” | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=9.8}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=9.9}{DILUTION=100 dilutant into 50 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {Linearity error in rate method, Result is lower than the dynamic range, Result is lower than the low panic value}; AU680 result: {Linearity error in rate method, Result is lower than the dynamic range, Result is lower than the low panic value}; AU680 result: {LIH test not performed, Result is lower than the dynamic range, Result is lower than the low panic value}; {RES EDIT OLD=0.7}{DILUTION=100 dilutant into 100 sample}; “AST less than 3 U/L - below analytical range of analyser”; AU680 result: {LIH test not performed, Result is lower than the dynamic range, Result is lower than the low panic value}; {RES EDIT OLD=0.3}{DILUTION=100 dilutant into 100 sample} | 1 | 0.17 | 0.00 |
| AU680 result: {OD of reaction is higher than maximum OD range, Unable to calculate a result}; AU680 result: {OD of reaction is higher than maximum OD range, Unable to calculate a result}; AU680 result: {OD of reaction is higher than maximum OD range, Unable to calculate a result}; AU680 result: {OD of reaction is higher than maximum OD range, Unable to calculate a result}; AU680 result: {OD of reaction is higher than maximum OD range, Unable to calculate a result}; AU680 result: {OD of reaction is higher than maximum OD range, Unable to calculate a result} | 1 | 0.17 | 0.00 |
| AU680 result: {OD of reaction is higher than maximum OD range} | 1 | 0.17 | 0.00 |
| AU680 result: {Result is lower than the dynamic range, Result is lower than the low panic value}; “AST less than 3U/L-below analytical range of analyser” | 1 | 0.17 | 0.00 |
| AU680 result: {Result is lower than the dynamic range, Result is lower than the low panic value}; “AST Result obtained from 1 in 3 manual dilution”; “AST less than 3 U/L - below analytical range of analyser” | 1 | 0.17 | 0.00 |
| AU680 result: {Result is lower than the dynamic range, Result is lower than the low panic value}; AU680 result: {Result is lower than the dynamic range, Result is lower than the low panic value} | 1 | 0.17 | 0.00 |
| AU680 result: {Result is lower than the dynamic range}; “AST less than 3U/L-below analytical range of analyser” | 1 | 0.17 | 0.00 |
| AU680 result: {Result may be affected by hemolysis, Result may be affected by icterus, Result may be affected by lipemia} | 4 | 0.66 | 0.00 |
| AU680 result: {Result may be affected by hemolysis} | 148 | 24.46 | 0.03 |
| AU680 result: {Result may be affected by lipemia} | 3 | 0.50 | 0.00 |
| <NA> | 514808 | NA | 99.88 |
Resurvey 1
| value | freq | pct_valid | pct_tot |
|---|---|---|---|
| AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 0}; AU680 result: {LIH test not performed}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 0} | 1 | 4.76 | 0.01 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {LIH test not performed}; “Result may be affected by haemolysis”; “Sample is very haemolysed” | 1 | 4.76 | 0.01 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {OD of reaction is higher than maximum OD range, Unable to calculate a result}; AU680 result: {OD of reaction is higher than maximum OD range, Unable to calculate a result}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 4}; AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {OD of reaction is higher than maximum OD range, Unable to calculate a result}; AU680 result: {OD of reaction is higher than maximum OD range, Unable to calculate a result} | 1 | 4.76 | 0.01 |
| AU680 result: {LIH test not performed} | 8 | 38.10 | 0.04 |
| AU680 result: {Result may be affected by hemolysis, Result may be affected by icterus, Result may be affected by lipemia} | 1 | 4.76 | 0.01 |
| AU680 result: {Result may be affected by hemolysis} | 9 | 42.86 | 0.05 |
| <NA> | 19782 | NA | 99.89 |
Resurvey 2
| value | freq | pct_valid | pct_tot |
|---|---|---|---|
| AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 0}; AU680 result: {LIH test not performed}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 0} | 5 | 8.93 | 0.02 |
| AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 1}; AU680 result: {LIH test not performed}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 1}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 0} | 1 | 1.79 | 0.00 |
| AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 1}; AU680 result: {LIH test not performed}; AU680 analysis: {HEMOL = 0, ICTER = 0, LIPEM = 2} | 1 | 1.79 | 0.00 |
| AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 0}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 0} | 3 | 5.36 | 0.01 |
| AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 3}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 1, ICTER = 0, LIPEM = 4} | 1 | 1.79 | 0.00 |
| AU680 analysis: {HEMOL = 2, ICTER = 0, LIPEM = 0}; AU680 result: {Result may be affected by hemolysis}; AU680 analysis: {HEMOL = 2, ICTER = 0, LIPEM = 1} | 1 | 1.79 | 0.00 |
| AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; AU680 result: {LIH test not performed}; {RES EDIT OLD=11.6}{DILUTION=200 dilutant into 100 sample}; AU680 analysis: {HEMOL = 6, ICTER = 6, LIPEM = 6}; “AST Result obtained from 1 in 3 manual dilution” | 1 | 1.79 | 0.00 |
| AU680 result: {LIH test not performed} | 17 | 30.36 | 0.07 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=10.4}{DILUTION=100 dilutant into 50 sample} | 1 | 1.79 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=12.4}{DILUTION=100 dilutant into 100 sample} | 1 | 1.79 | 0.00 |
| AU680 result: {LIH test not performed}; {RES EDIT OLD=8}{DILUTION=100 dilutant into 50 sample} | 1 | 1.79 | 0.00 |
| AU680 result: {Result may be affected by hemolysis} | 22 | 39.29 | 0.09 |
| AU680 result: {Result may be affected by lipemia} | 1 | 1.79 | 0.00 |
| <NA> | 25196 | NA | 99.78 |
Between-survey agreement
No agreement analysis available
International Coordinating Centre, China Kadoorie Biobank (CKB), CTSU, Nuffield Department of Population Health, University of Oxford Old Road Campus, Headington, Oxford, OX3 7LF
Tel: +44 (0)1865 743743 | Fax: +44 (0)1865 743985 | Email: ckbaccess@ndph.ox.ac.uk
Copyright China Kadoorie Biobank (CKB), University of Oxford, (2024)
Page generated: 27-02-2024